Home/Safes/Safes...How To

How to Dial Your Safe

  1. Turn Left stopping when the first number comes to the mark the 4th time.

  2. Turn Right stopping when the second number comes to the mark the 3rd time.

  3. Turn Left stopping when the third number comes to the mark the 2nd time.

  4. Turn Right past “0” until the dial comes to a complete stop.

  • Video Tutorial
  • WARNINGS:

  • You should always turn the dial slowly and carefully. If you turn past a number in the combination while dialing, DO NOT turn the dial backwards. You must re-dial the entire combination.

  • Never force the handle to turn. If the combination has been properly dialed, the safe handle will turn easily. Trying to force the handle to turn after dialing an incorrect combination can jam the safe mechanism in the locked position.

  • Make sure the door bolts are fully retracted before closing the safe door. Closing the door with the bolts partially extended can also cause damage to your safe’s operating mechanism.



6120 Digital Keypad

Combination Change

Make sure your door is open before you do this! Do not close your safe until you have tested your new code.

  1. Press74*

  2. Press the six digits of your original code, followed by #. Wait for the lock to beep 5 times.

  3. Press 1 *

  4. Press the six digits of your new code, followed by #. Wait for the lock to beep 3 times.

  5. Again press the six digits of your new code, followed by #. The lock will beep 3 times.

If your lock sounds a continuous tone for about one second anytime during the code changing procedure, you have made an error. When this happens, the lock ignores your new code and reverts to the old one.